| INPUTS |
| P2 |
2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
|
| P5 |
5 Single-Ended, 5 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
|
| OUTPUTS |
| P2 |
2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
|
| P5 |
5 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
|
| SWITCHES |
| Front Panel |
Power (On/Off)
|
| Rear Panel |
On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)
|
THD+N (225 W into 8 Ω)
|
0.0007% at 1 kHz, 0.008% at 20 kHz
|
POWER OUTPUT
(Per channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channels driven.) |
| Impedance |
8 Ω
|
4 Ω
|
2 Ω
|
# of Channels Driven
P2, P5 |
|
|
|
Statement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output.
|
|
|
| IMD |
0.00019% (CCIF, 325 W into 8 Ω)
|
| POWER BANDWIDTH |
10 Hz to 150 kHz
(+0 -3 dB, 325 W into 8 Ω)
|
| FREQUENCY RESPONSE |
20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB)
|
INPUT SENSITIVITY
(RCA and XLR 0 dB inputs) |
1 Vrms in for 28.3 Vrms out
(100 W into 8 Ω)
|
| INPUT IMPEDANCE |
18 kΩ (RCA), 22 kΩ (XLR)
|
| DAMPING FACTOR |
>600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω)
|
| S/N RATIO |
125 dB, A-weighted (ref. 325 W)
|
CROSSTALK
(between any two channels) |
-140 dB (20 Hz), -80 dB (20 kHz)
|
| POWER REQUIREMENTS |
| SUPPLY VOLTAGE |
105 to 130 V, 60 Hz
|
|
|
|
| DIMENSIONS |
| Height |
9-3/8 inches (23.8 cm) including feet
|
| Width |
Faceplate 19-1/4 inches (49 cm)
Chassis 17-1/4 inches (43.8 cm)
|
| Depth |
22-1/2 inches (57.2 cm) including handles
|
WEIGHT (unpacked)
|
P2
P5 |
75 lb (34 kg)
130 lb (59 kg)
|
|
|
